Category Archives: Lexmark Printer Error Code

25Apr/18
Fix Lexmark Printer Says Busy Errors Code

How to Fix Lexmark Printer Says Busy Errors Code 2420?

If you are using Lexmark 2420 Printer, that did fine work a few hours before, but now the printer hangs at the ‘Busy’ state after a new toner cartridge is installed. You are unable to understand that what type of situation occurs suddenly. Then don’t worry about it. Fix Lexmark Printer Says Busy Errors Code 2420 is not such a difficult task for you if you follow the troubleshooting steps that suggested by the Lexmark support professionals.

Lexmark Printer Says Busy

Well, there could be a variety of reasons for occurring ‘ Busy Error’, include as communication failure issue between one of the printheads (cartridges) and the All-In-One (AIO) or by a short in one of the printheads, In the AIOC property list the scanner-busy flag is set to true. Or the AIOC application is not getting the unlock command to remove the scanner-busy flag, etc. Then you need to follow the above steps that defined below to fix this issue.

Steps to Fix Lexmark 2420 Busy Error:-

Step 1:- Power off the Lexmark Printer and Disconnect Cables

Power off the Lexmark printer and disconnect all communication cables (that is the parallel, Ethernet, USB cables and wireless option) going into the printer. Then leave the power cord as the ONLY cord or cable going into the printer.

Step 2:- Confirm the Correct Toner Cartridge

Then you need to confirm that the correct toner cartridge for this printer model was installed properly.

If you find that the toner cartridge that was installed, it’s not seated correctly. The remove and re-install the cartridge, and ensure its seated properly.

Step 3:- Power on the Lexmark Printer

Power on the Lexmark printer. If it comes to the ‘Ready’ state after powering back on, use the operator panel on the printer to print one of the internal pages, such as a settings page or a demo page.

Step 4:- Download the Latest Firmware Code

  • Go to Lexmark Support website.
  • Next, go to the left-hand pane, and then hit on the “Support & Downloads” link in the left-hand pane.
  • Then type your printer model inside the “Search by Product or Software Name” box, and then hit “select”.
  • Next, hit on the “Downloads” tab and check the latest firmware version.
  • Then hit on the “Download” button and save the file. Make a note as to where you have the files saved.

Step 5:- Power off the Printer Again

Now you need to power off the printer again. Then reconnect the communication cable(s) back into the printer, one at a time (if you had more than one installed). Then power on the printer after you install each cable and print a sample page.

I hope your issue is fixed after performed all the above steps.

In case, if the  issue still persisting or if you are having difficulties to follow the above steps, then you should contact Lexmark technical support professional for instant help.

Connect with Lexmark  Support Experts for Immediate Help:-

lexmark-printer-Customer Service

You can take online help through our third-party proficient professionals at dialing Lexmark Support Number, which works 24×7 hours. A team of our certified and experienced professionals will give you the comprehensive guide to fixing Lexmark Printer technical troublesome situations. Through the experts, you can resolve any kind Lexmark  Printer technical issues or errors timely with the finest and easiest solutions. Hence, connect with our technicians now to avail more help for further Lexmark  Priner queries

15Mar/18

How to Fix Lexmark Printer Error Code 241.10?

Error 241.10 is a numeric depiction of Paper Jam error in Lexmark Printer. Learn more about this error through this blog or Lexmark Printer Customer Support Number 1-800-610-6962. Untangle the jam inside your printer to fix Lexmark Printer Error Code 241.10. The error message says, “241 Paper Jam – Check Tray 1 “.

Lexmark Printer Error Code 241.10

Error 241.xx stands for particularly paper jam. No matter what number you put after 241, it will typically mean that your printer has paper jam. It implies a paper jam at the front of the printer near the paper tray 1. Error 241.00, 241.01, 241.02, 241.03, 241.04, 241.05, 241.06, 241.07, 241.08, 241.09, 241.10, 241.11, 241.12, 241.13, 241.14, 241.15, 241.16, 241.17 all represents paper jam issue within the printer. You need to clear the entire paper path to get along with the error. You need to follow the exact same procedure for paper jam to fix this error.

Effective Solutions to Troubleshoot Lexmark Printer Error Code 241.10:

It is one of the most common Lexmark Printer errors. There is nothing to freak out because of the number. Read the blog or connect with Lexmark Printer Customer Care Support to get to the roots of the error.

  • First of all, you need to take the paper tray 1 out of the printer.
  • Look for jammed sheets inside the printer and try to print again.
  • If the paper jam reappears, check whether the sheets are being feed out of the paper tray or not.
  • If no paper is passing from the tray 1, remove the tray 1 once again.
  • Next you need to check the path where the tray goes in.
  • Look for tanned colored rubber rollers and clean them thoroughly. Use a dry cloth to clean it and thus try to print again.
  • The feed rollers may be worn up if it still does not pull any paper.
  • Remove the tray 1 again and remove the rubber tire from the each roller.
  • Be care. Do not damage the rubber tire during this time.
  • If everything works fine, you do not need to replace any parts of the printer.
  • But even after trying everything if the printer still does not feed papers out of the try, you need service.
  • If the paper is being feed, but getting struck within somewhere the printer, remove the paper tray 1 again.
  • Look into the space where the paper tray goes and look upwards of the front of that area.
  • If any small piece of paper is struck around any of the rollers, remove it. Be careful while working with rollers. Do not damage it further.

Hurry! Place a Quick Call at Lexmark Printer Customer Service Number for Instant Help:

lexmark printer Support

If you are unable to make the critical process on your own, we are here to help you. We offer online support services to fix any Lexmark error that you face. Lexmark Printer Customer Service Number is ready to assist you anytime you need. No matter how complex the error is, we offer exact solutions as per your need. Whenever you face any technical error, our technical team takes care of everything. Hence dial the toll free number to get personalized solution at desk.

09Mar/18

How to Fix Lexmark Pro901 PrintHead Error?

Print Head error is the mother of all printer errors. If you are experiencing the same with your printer, make a call at our Lexmark Printer Customer Support Number 1-800-610-6962. You need to be careful while you try to Fix Lexmark Pro901 Print Head Error.

Lexmark Pro901 PrintHead Error

If technology congregates with innovation, technical blunders are bound to happen. Mistreatment makes your printer works in sluggish way.  If you do not fix such errors in time, you may face grave consequences. One of such error that affects almost every available printer in the world is print head error. A Print Head error in Lexmark Printer appears due to many reasons. Number of mechanical issues turn into print head error. So if you are not happy with your printer’s performance, it means the print head is corrupted. Clean the cartridges and print head to resolve the print head error at any point of time.

Effective Solutions to Troubleshoot Lexmark Pro901 Print Head Error:

It is one of the most common errors that trouble any printers. There is nothing to freak out. This blog post will help you to fix print head related errors. Follow the steps as per order to get to the roots of any print head errors. If you have Lexmark Print Head cleaning kit, you can use that as well. When suddenly the print head monster gets you, connect with Lexmark Printer Customer Care Support now.

  • First of all, you need to look for “Replace Print Head” in the menu of the printer.
  • Touch Screen model users, touch ink level icons on the lower right corner.
  • Now click on “More Options” and thus scroll down to “Replace Print Head”.

For All Other Lexmark Printer Models follow the down mentioned steps:

  • First thing you need to press on Wrench button.
  • Next, scroll to “Maintenance Menu” followed by clicking on OK button.
  • Now scroll down to “Replace Print Head” option and thus click on OK.

Next, you need to go through some more steps to make this error disappear:

  • First thing, you need to lift the latch.
  • Now lift the print head out of the printer carrier.
  • Now clean the contact of the print head carrier from which you just removed the print head.
  • Also clean the contact of the rear side of the printer.
  • Now firmly reinsert the print head into its adjacent place.

Make a call at Lexmark Printer Customer Service Number for More Help:

lexmark printer Support

Whenever and wherever you face any issues related to Lexmark Printer, connect with us quickly. We, being a team of industry professionals offer complete solutions for Lexmark. Lexmark Printer Customer Service Number is capable of resolving any issues at any point of time. With complete solution and availability of 24*7, freeing yourself from technical blunders is much easier. Hence dial the toll free number for composed solutions at your desk.

08Mar/18
How to Fix Printer Spooler Error in Windows XP?

How to Fix Lexmark Printer Cartridge Error?

Cartridge Error is the mother of all types of printer’s error. If you are experiencing the same disrupt error, place a call at Lexmark Printer Customer Support Number 1-800-610-6962. You can fix Lexmark Printer Cartridge Error in several ways.

Lexmark Printer Cartridge Error

Lexmark Printers represent reliability and affordability. Instead of that, it is prone to occasional errors. There are numbers of Lexmark Printer errors that can give you haunted nights. You may face issues that include empty paper trays, low toner and many more. But nothing is as much troubling as Printer Cartridge error. The cartridge error appears to be vague. But there are number of ways to fix it.

A Lexmark Printer cartridge error comprises following error codes and messages:

  • Lexmark cartridge error 1203
  • Lexmark left cartridge incorrect
  • right cartridge incorrect Lexmark
  • Lexmark printer says remove tape from cartridge
  • Lexmark cartridge override
  • Cartridge Error 1102, 1203, 1204 or 120F.

Does not matter what cartridge error you are experiencing, the process to fix them will be similar. You need to check a couple of things to rectify this disturbing issue. You can try restarting your printer or reinstalling of cartridges. You can also reset the printer to fix this error.

Efficacious Solution to Troubleshoot Lexmark Printer Cartridge Error:

  • First thing you need to do is to remove the print cartridges.
  • Now close the carrier cartridge lids followed by detaching the power cords from the wall outlet.
  • After that, reconnect the power cables back to the wall outlet and the printer as well.
  • If the power button is not lit, press it.
  • Put back the cartridges and check for the error.

If the error still recurs, it means that one of the cartridges is not working properly. Go through the down mention process for further help. Else you can connect with Lexmark Printer Customer Care Support to get to the roots of the error.

  • First thing you need to remove all the ink cartridges out of the printer.
  • Now close the cartridge carrier lid to proceed further.
  • Terminate the power cords out of the wall outlet and printer
  • After a while reconnect it and check whether the power button is lit or not.
  • If not, press the button and reinsert black ink cartridge
  • If the error still persists, replace the black cartridge with new one.
  • If no error appears, put back all the cartridges one by one firmly.
  • Check for the error whether you are still having it or not.
  • If yes, change the color cartridges with new one.

Dial Lexmark Printer Customer Service Number for More Help:

Are you lately experiencing cartridge related errors in your Lexmark Printer? If yes, connect with our Lexmark Printer Customer Service Number for instant help. We are team of industry professional at your service 24*7. Our constant support makes all printer related errors disappear in no time span. Our composed results offer satisfactory results to every customer. Hence place a call at the number for instant results at your desk.

07Mar/18

How to Resolve Lexmark Communication Not Available Windows 10?

There is nothing more frustrating than a “Communication Not Available” error. If you are tired of this error, make a quick call at Lexmark Printer Customer Support. This blog will help you to resolve Lexmark Communication Not Available Windows 10 error in simple yet effective steps.

Resolve Lexmark Communication Not Available Windows 10

While you try to print on Lexmark Printer, you face communication error. It is the most annoying error that a printer user can face. A number of things may result into this error. If your Lexmark Printer is not working with Windows 10, it typically means that Lexmark Printer cannot communicate with computer.

Effective Solutions to Troubleshoot Lexmark Communication Not Available Windows 10:

If you are looking for an answer for “how to fix printer communication error”, this blog will help you out. Here we have discussed the most suitable solution to fix Lexmark X4650 not working in Windows 10. You can also check with Lexmark Printer Customer Care Support for more relatable help.

Solution1: Reboot Your System and Turn off Your Printer

This general solution often turns out to be exceptionally effective. You just simply need to turn you printer off for a while. Along with that, reboot your system which the printer is connected with. This trick can be magic for some users.

Solution2: Stop and Start Printer Spooler

  • First thing you need to do is to press the Windows and the R button together to open the Run dialog box.
  • Now type services.msc followed by clicking on the Ok button.
  • You need to now find the Sprint Spooler from the list. Now open its properties dialog box to proceed further.
  • Press the Stop button in General option.
  • Now click on Ok button to disable the service.
  • Now open the properties dialog box again to enable it again.

Solution3: Uninstall Printer and Update Driver Again

  • First of all, disconnect your Printer and press the Windows and R button together.
  • When the Run dialog box appears, type devmgmt.msc and press Ok.
  • In Print queues, you need to find your printer.
  • Now uninstall the printer device through right clicking on it.
  • Restart your system so that the changes can take place.

If you are using USB cable to connect your printer with system, you can perform the following steps:

  • Expand the Universal Serial Bus controllers’ branch after opening Device Manager.
  • Click on USB Root Hub Device followed by clicking on Power Management.
  • Disable the Allow the computer to turn off this device to save power option.
  • Now click on OK button and reboot your computer.

Dial Lexmark Printer Customer Service Number for Informative Results:

lexmark printer Support

If you are looking for more suitable results, you can directly place a call at Lexmark Printer Customer Service Number. Being a team of well skilled engineers, we offer complete solution under single roof. Freeing yourself from technical glitches related to Lexmark Printer is much easier with our 24*7 availability. Hence dial the toll free number now to get personalized solution at your desk.

27Feb/18
Fix Lexmark Printer Error Code 1203

How to Fix Lexmark Printer Error Code 1203?

Error Code 1203 is a typical ink cartridge related error. Fix it as early possible by placing a call at Lexmark Printer Customer Support Number 1-800-610-6962. Carry out the below mentioned steps to Fix Lexmark Printer Error Code 1203.

How to Fix Lexmark Printer Error Code 1203

Lexmark Printer is an incredible printing device. It works completely fine until some internal issue occurs. When the ink overflows from the cartridges, you get this error. If the ink got smeared on the holder where the contact panel with the cartridges, you can have this error. This error code 1203 is mainly a cartridge failure. There is nothing to do with printer hardware failure.

Step by Step Solutions to Troubleshoot Lexmark Printer Error Code 1203:

Cleaning the smeared ink will probably resolve this error. But if that does not work, we have jotted down other most effective solution to deal with this error. You can also check with our Lexmark Printer Customer Care Service for high quality services.

  • First of all, you need to turn on your All-in-One Lexmark printer.
  • Now pull the control panel towards yourself and proceed for cartridge door.
  • Open the cartridge access door and let the cartridge carrier move.
  • When it stops at the loading position, pull the old cartridge towards yourself.
  • Close the access door when the cartridges are out of the printer.
  • Close the control panel and turn off the printer.
  • Turn the printer ON again and look for the error at the Operator panel.
  • If the error message reappears, there is something is wrong with printer hardware.
  • If the error message shows, cartridge is missing; you need to proceed further to fix this error.
  • Replace the cartridges inside the printer.
  • Next you need to place the color cartridges and insert the black cartridges.
  • Push the cartridges back in the places until they got tightly placed.
  • Now shut the cartridge access door followed by closing the Control Panel.
  • If the error still appears, change the position of the cartridges to check which one is causing the problem.
  • Replace the damaged cartridges to fix this error.

Dial Printer Error Repair Support Number 1-800-610-6962 for More Informative Results:

lexmark printer Support

If you are facing printer related errors while working, connect with Printer Error Repair Support now. Backed with professional team, we resolve all issues with utmost priority. We aim to deliver satisfactory results with higher efficiency. Hence dial the toll free number to free yourself from all headaches. The proficient team will offer you personalized solutions for all you printer issues.