Tag Archives: Epson Pro 4800 Stylus 00010035 Errors

02Nov/17
How To Fix Epson Pro 4800 Stylus 00010035 Errors

Epson Stylus is designed to redefine the photographic print quality performance of the printer used by professionals by incorporating the latest features in it.  This further will enhance the printing quality while users are working with the Stylus. But you may come across unexpected error codes such as Epson Pro 4800 Stylus  00010035 Errors and 00010004 in the Pro 4800 model. Well these errors are caused due to pump phase detection error where the position of the pump cannot be detected even if its motor turns at designated amount. Other reason includes damaged pump Phase Sensor or may be due to completely broken power supply fuse for ASF/Pump Motor driver on the MAIN Board.

The error 00010004 is a sign of defect in the motor encoder which occurs at the time of initial operation of power on or during the CR Motor operation.  It is also possible that the encoder pulse signal is not properly placed during intervals. As a result, the message gets displayed by making the printer stop working.  The error is also caused due to inverted wiring of A and B pulses as well as the CR Motor. So we have steps to fix  Epson Pro 4800 Stylus  00010035 Errors .

 Epson Pro 4800 Stylus 00010035 Errors

Steps to troubleshoot Epson Pro 4800 Stylus  00010035 Errors and 00010004 errors

Solution to error 00010035 and 00010004 are as follows:

For 00010035 error code

  • Check whether or not recovery is possible by turning the power OFF and back ON. If it is the case where the error seems to be recurring, then, it is recommended to replace the Pump Phase Sensor immediately. Also, users can easily replace the C593 MAIN Board.

For 00010004 error code

  • Perform a proper check to see if the CR Scale for detection of the encoder pulse is completely removed or not? The next thing is to have check for any dust particles such as paper dust or if there have been any damage to the CR Scale. Check the CR Encoder Sensor connector connection, Motor Assy. and the CR connector. You need to have a check whether the CR Timing Belt Tension Adjustment is properly done or not? Users are advised to replace the CR Encoder Sensor, the Motor Assy., CR 7 as well as the C593 MAIN Board.

I hope these steps will help you out. If not then, call us at below section

Customer Support

Call us at Epson Stylus Support for excellent solution instantly

We are available at Epson Customer Support Number to bring users 24*7 hours support service for Epson Stylus issues.  Customers can reach us anytime to help us understand their issues and solve them with the most appropriate solution. Our team is backed by thorough professionals who holds deep knowledge about every minute to minute Epson Stylus technical issues. So, call us and get your queries solved.