Get to know about Easy to Apply methods for Fixing Epson Error Code 0x97

Gadgets like printer have reduced our efforts in making copies to a great extent. Now within few minutes, you can get as many prints as you want. There are several options present in the market in New York City, but one which offers best alternatives in all segments is Epson Printer. With quality features and design, it has shown that it can cater needs of any user. However, with passing time you can encounter Epson error code 0x97. There are high chances of occurrence for this error if you are using Epson printer regularly since a long time.

Steps to Fix EEpson Error Code 0x97 In MacBook pro

Error 0x97 can come up at any time without giving warnings or signs. Suddenly your printer will show you a message to turn off your device, and then it turns on again. This code majorly come up in between the printing process and halts it immediately. Until you find an Epson error fix, this error code will keep on creeping up whenever you will use your printer.

The reason behind Epson WF-3620 error code 0x97 is an internal hardware issue which is sudden motherboard failure. Only a few models such as Epson WF-3620, Epson WF-4630, etc. are known to have this problem. It is tough to perform a repair in such a situation, but there are some methods which can help you in fixing this issue. Make sure that you follow all the steps as mentioned in the process as a deviation from the same may not provide you desired result in New York, NYC.

Epson Error Code 0x97

Method 1: Unplug the machine and then Plug-in

  • Step 1: Open the printer case and check whether any jammed papers or debris are there or not. If you find any of them, then remove it with care
  • Step 2: Now take out all printing cartridges from the printer
  • Step 3: After taking out the cartridges, unplug all the USBs and cables of printer
  • Step 4: Once you unplug the printer, press the power button. It will discharge the residual current in the printer
  • Step 5: Now plug in all the cables and USB’s
  • Step 6: Turn on the machine and check if the error shows up again

Related Blog: How To Fix Epson Printer XP-830 Error Code 0x97?

Method 2: Unplug and Plug-in your device in an inverse manner

This method is the inverse version of the process mentioned above. If method 1 fails to fix your issue, then proceed further with method 2. By trying the below process, you can confirm if the error is occurring due to internal hardware failure or not.

  • Step 1: First, turn off your printer
  • Step 2: Unplug all the cables cable attached to it and then wait for 5 minutes
  • Step 3: Now press and hold the power button for more than 60 seconds. Make sure you don’t release it before mentioned time-limit
  • Step 4: After holding the power button for 60 seconds now plug in the power cable while pressing the power button again
  • Step 5: Now press the power button and hold it for another 60+ seconds after plugging in the power cable
  • Step 6: After plugging the power cable, release the power button and check if the error code is still showing up on printer or not

Method 3: Using a wet tissue

Sometimes waste ink around head sprayer can be responsible for this issue. In this situation, all you need to do is wipe the extra ink with the help of wet tissue. Below are the steps to apply this method

  • Step 1: First you have to switch off the machine
  • Step 2: Now open the printer casing
  • Step 3: Take a tissue and dip it in warm water
  • Step 4: Now move the head to the center
  • Step 5: Place the tissue on the head cleaning mechanic pad
  • Step 6: Now replace the head to the parking spot and wait for 10 minutes
  • Step 7: After 10 minutes, remove the tissue and close the casing.
  • Step 8: Now turn on the printer and check if the problem is persisting or not

If it does not work for the first time, then you can repeat this process for 3 more times to get results.

Method 4: Epson 0x97 fix patch

You can also resolve this issue by downloading a fix patch. Below is the process to apply this method.

  • Step 1: Download (0x97) Fix Patch. The file size will be 1MB
  • Step 2: Click on the “Scan” button
  • Step 3: Then click on ‘Fix.’

Contact Number To Fix Epson Error Code 0x97

Epson Printer Support

If all of the above methods fail to address your problem, then it will be a wise decision to contact a technician who can repair your Epson Printer in New York City efficiently.