Category Archives: Fix Epson Printer Error

21Jul/18

How To Fix Epson Printer error Message C0084

Epson is a Japanese Electronics company which manufactures computer printers and equipment related to imaging. The purpose of a printer’s driver is to enable printing irrespective of the printer’s model. Despite having advanced printing facilities, there are many types of problem with Epson printers. If you want to fix your Epson Printer error message C0084, you must take help from professionals and have all the answers to fix the issues.

When does the Epson error message C0084 appear?

If you find the root of the issue, you will be able to resolve it easily. There are many reasons for error message C0084:

  • A corrupted or interrupted print job
  • A data or interface cable that is not connected correctly
  • A lot of documents have been sent to print

Solutions for the issues:

You can follow the steps to resolve your issues regarding error message C0084 of Epson Printer. Our experts have found the solution to take you out of the mess.

  • Disconnect the printer from the data source
  • Verify if the printer passes through the RAM and ROM
  • Print a status sheet to test the printer standalone
  • Cancel the pending print jobs on the network or computer
  • Reset and reconnect the data cable at both ends

Related Blogs: 4 Easy ways To Repair Epson Error Code 0x97

If you are still getting the error message after applying the steps mentioned above, you can connect with our experts who are ready to guide you with best in class support solutions.

 Want quick solutions for Epson printer errors? Connect with us

epson-printer-support-phone-number

You are requested to dial at Epson toll-free 1-800-610-6962 as soon as you face Epson Printer error Message C0084 on your Epson Printer to avail perfect solutions from our experts. For instant reply, take the help of our live chat support.

18Jul/18

5 Ways to Fix Epson Error Code 0xf1

Are you seeing Error Code 0xf1 on your computer screen when you are performing the printing task from your Epson Printer? You are unable to understand or solve the issue! If yes, then you don’t need to worry about it. Well, it’s a very simple task for you to Fix Epson Error Code 0xf1, by performing the simple troubleshooting methods or steps. Those solutions, especially suggested by the Epson Printer service team of skillful professionals, who’s solved billions of printer queries in a less time. The methods also tested and worked for all most Epson printer model to eradicate the error.

Epson Error Code 0xf1

The hardware problem means you have required specialist help to solve the issue, or may need to repair/replace the hardware faulty parts. The other possible cause to happening the Epson Printer Error Code 0xf1 includes as Paper jammed, Print head issue, Network issue, Operating System issue, Bad virus and Hard disk issue, etc.

5 Effective Methods to Fix Epson Error Code 0xf1:-

Method 1:- Verify Hardware Part

First of all, you should try to solve the fault hardware or software part on your within the Epson printer. If you find any, the next step you need to do is to unplug the power cable of your printer, and try to remove the cartridge, and then attach it again. By doing this thing, your problem possibly solves. You should do it on immediately basis, because the hardware related problem might be creating the difficult issue for you for long life use of the system, another side by doing the step you will be again used on your system.

In case, if the Epson Error Code 0xf1 is not gone, that you should continue with the next method to fix the issue.

Related Blog Post: How Can I Fix Epson Error Code 0x97 on mac?

Method 2:- Verify the Print Head

You should try to verify that your print head is stuck or not be moving on the carriage rail (steel rod).

To perform the task, follow these steps:–

  • Open the cover of the Epson printer.
  • Then remove the cartridges.
  • Unplug the power cable from the computer and Printer.
  • Next, move the carriage head (cartridge carrier) from left to right manually.
  • Now verify that if there is anything inside blocking the carriage head to move back and forth like small dirt or jammed piece of paper. ‘
  • Also, verify the jammed paper, if you found any.

Now, check the error is determined. If not, then go the next method.

Method 3:-Clean Out All Junk Files

The other solution is to Fix Epson Error Code 0xf1, then you should try to clean out all junk files, decrease the start-up time, restore lost memory issues and de-fragment your hard-drive.

Method 4:- Reattach Device

If the above method does not work to fix the issue, then you should try to reattach your device to fix the issue. Then try to unplug your Epson Printer from the main socket and try to remove the printer cartridge carefully. Now, reattach your device again.

Method 5:- Verify Your Computer

Finally, the important step you have required to take is to verify that your computer is infected with viruses. Try to check is there another infected application running your computer or application which is incompatible with the OS, might be this creating a problem or producing the error. Well, many users encountered the Epson Printer Error Code 0xf1 due to same problem reason. So, verify the infected and malware files on your system to smoothly run, and also printer execution.

Call at Epson printer Support Phone Number to Receive Fast Online Guidance by Experts:-

For more such technical errors in your Epson printer, you can call at Epson Support Number, which is available 24×7 hours for your online help. A team of our third-party proficient and knowledgeable professionals is always ready for your assistance. The experts will give you the most effective solutions for Epson printer technical issues.

04Jan/18
How To Fix Epson Printer Communication Error While Scanning

How To Fix Epson Printer Communication Error While Scanning?

This is usually a result of not connecting the scanner appropriately, not setting up of the scanner properly and may be the scanner is completely turned off. So, we have a wide number of steps to fix Epson Printer communication error while scanning that are quite easy for users to apply.

Epson Printer Communication Error

Steps to fix Epson Printer communication error while scanning

Try out our below steps to get rid of the issue faster

Step 1: Ensure that the scanner is properly connected

  • Make sure that the printer is turned on and is connected in a secured way to the computer or with the USB hub.
  • If it is the case where the printer is connected to a USB hub then, ensure that it is well connected to the first tier hub which will be the hub closest to the computer. It will has its own A/C adapter when more multiple hub is connected to the computer.
  • Try to restart the computer.

Step 2: Do ensure that the scanner is set up properly.  

To do this, perform below steps as guided by Epson Printer Technical Support professional team:

Turn on the product first and do one of the following steps as mentioned below:

  • Navigate to the Appsicon screen to select the “EPSON Scan Settings” icon.
  • If you are working with other Windows system then, ensure to click the “Start” iconor simply select the “Programs or All Programs” option. Choose the “EPSON Scan > EPSON Scan Settings”.
  • For users who are operating on OS X, they need to open the “ApplicationsEpson” software and then, double-click the EPSON Scan Settings.
  • If an option is visible which is displayed as EPSON Scan cannot be startedwindow then, click the “No” icon. You will see the window appearing twice.

Step 3: Make a proper selection of the scanner. Perform below steps:

  • If the product is connected to the desktop with a USB cable then, ensure that the Connectionsetting is set into “Local” mode.
  • If the product is set up on a network then, do ensure that the Connectionsetting is set to Network mode and the scanner is visible right under the ‘Network Scanner Address’ with accurate IP address.
  • Click the “Add” icon now.
  • Make a proper selection of the IP address which will appear in the list. If there are multiple IP address then, select the one that matches the product’s IP address.
  • Click the OK button now.
  • Tap the “OK” button now to close the Epson Scan Settings window immediately.

Connect to Epson Printer Customer Service professionals to experience instant solutions

Epson Printer Customer Support

For more such queries, connect us at Epson Scanner Customer Support Number for world-class solutions related to Epson scanner issues at your desk. We are reachable by users anytime whenever in need. Technicians working at our end are backed by strong skills which has made them renowned among users across the country. So, feel free to contact us anytime.

 

13Nov/17
faqs

How To Fix The Error Code 0001000c On Epson 7600 Printer?

Epson printer are well known printing devices preferred by infinite number of users across the world but sometimes, you can come across critical error codes such as 0001000c which is usually visible in Epson printers. This error code happens to exists even if users are turning off the device and switching it on.  It will start printing accurately for approximately 10 documents but again the issue will start arising. Now, have us discuss top solutions to B error code 0001000c on Epson 7600 Printer.

Solutions to troubleshoot 0001000c on Epson 7600 Printer

Solution 1: Clear off the counters completely. To do this, perform below steps carefully

  • Turn off the printer first and hold down the “Paper Source, Paper Feed, Select Feed as well as Cut/Eject” buttons at the same time while you are turn the printer on again.
  • Users are needed to navigate through all menus to completely clear off the counter

Solution 2: If the above solution did not work out then, try this one

  • This solution asks users to perform a routine maintenance while keeping ink tanks full.
  • Clean out all the print head with the help of denatured alcohol solvent
  • Now, put up two layers of paper towels in the extreme bottom of a dish to completely protect sensitive sprayer heads.
    Put enough of solvent in the dish to cover the screen completely which the cartridges will stay while in use.
    Take two small screws which will be used to hold white ceramic piece properly
  • Make use of the ceramic piece to completely reveal the underside
  • Now, gently move the head up and down to slosh solvent around it
  • Work with the canned air with a plastic straw to easily blow up through all orifices
  • Now, completely empty your dirty solvent from bowl to replace with paper towels and clean all of the solvent. Soak it for at-least 10 minutes and rinse it again with a clean solvent poured directly on all of the parts.
  • Gently shake the solvent off the head and then, take it outside to spray properly with compressed air into all orifices. This should be done to completely clear out and help evaporate your remaining solvent. Apply a clean paper towel for 20 minutes and then, re-install the head as well as cartridges to print it like a new printer.

Related Blog: How To Fix Epson Printer Error Code W-12?

Call us at Epson Printer Support Number to fix your issues by our technicians promptly

Customer Support

We are available at Epson Support Number to connect to us immediately and get solutions by our technicians for Epson printer issues. Solutions are brought world-class and are matched according to the latest market standards. So, for any such query, do call us and get the problem solved.

 

02Nov/17

How To Fix Epson Pro 4800 Stylus 00010035 Errors

Epson Stylus is designed to redefine the photographic print quality performance of the printer used by professionals by incorporating the latest features in it.  This further will enhance the printing quality while users are working with the Stylus. But you may come across unexpected error codes such as Epson Printer Error Codes 00010035 Messages in the Pro 4800 model. Well these errors are caused due to pump phase detection error where the position of the pump cannot be detected even if its motor turns at designated amount. Other reason includes damaged pump Phase Sensor or may be due to completely broken power supply fuse for ASF/Pump Motor driver on the MAIN Board.

The error 00010004 is a sign of defect in the motor encoder which occurs at the time of initial operation of power on or during the CR Motor operation.  It is also possible that the encoder pulse signal is not properly placed during intervals. As a result, the message gets displayed by making the printer stop working.  The error is also caused due to inverted wiring of A and B pulses as well as the CR Motor. So we have steps to fix  Epson Pro 4800 Stylus  00010035 Errors .

 Epson Pro 4800 Stylus 00010035 Errors

Steps to troubleshoot Epson Pro 4800 Stylus  00010035 Errors and 00010004 errors

Solution to error 00010035 and 00010004 are as follows:

For 00010035 error code

  • Check whether or not recovery is possible by turning the power OFF and back ON. If it is the case where the error seems to be recurring, then, it is recommended to replace the Pump Phase Sensor immediately. Also, users can easily replace the C593 MAIN Board.

For Epson Printer 00010004 error code

  • Perform a proper check to see if the CR Scale for detection of the encoder pulse is completely removed or not? The next thing is to have check for any dust particles such as paper dust or if there have been any damage to the CR Scale. Check the CR Encoder Sensor connector connection, Motor Assy. and the CR connector. You need to have a check whether the CR Timing Belt Tension Adjustment is properly done or not? Users are advised to replace the CR Encoder Sensor, the Motor Assy., CR 7 as well as the C593 MAIN Board.

I hope these steps will help you out. If not then, call us at below section

Customer Support

Call us at Epson Stylus Support for excellent solution instantly

We are available at Epson Customer Support Number to bring users 24*7 hours support service for Epson Stylus issues.  Customers can reach us anytime to help us understand their issues and solve them with the most appropriate solution. Our team is backed by thorough professionals who holds deep knowledge about every minute to minute Epson Stylus technical issues. So, call us and get your queries solved.

27Oct/17

How To Fix Epson Printer Error Code 0001001B?

The Epson Printer Error Code 0001001B is usually known as a “SERVICE REQ” error and a “Head driver (TG) temperature” issue
which causes printer to stop operating when it detects any abnormal internal temperature of the print-head. This process is executed with the help of thermistor located in the head while users are printing documents without firing ink from its nozzles. Epson printer’s print-head internal temperature then rises because of its printing operation without even firing ink. As a result it leads to a breakdown of the print-head, poor contact, short and disconnection of tape electric wires and the last consequence is a main board failure. Such critical errors lead to CPU damage.  Below are methods described to Fix Epson Printer Error Code 0001001B.

Troubleshoot Epson Printer Error Code 0001001B

Methods to Troubleshoot Epson Printer Error Code 0001001B

Method 1: Checking if the Printer Can Recover from the Error

  • In this method users are suggested to go for a check if the printer can recover from the error by just turning it OFF and ON. If it does not work out then, it is advised to replace the print head as well as the main board of the printer.

Method 2: If the first method did not work out then, try this out

  • Users are suggested to purchase a bottle of cleaning fluid which should be around 4 oz., pint, and gallon sizes.
  • Turn on the printer and press the ink button and unplug the printer when the cartridge goes to the load cartridge position. Again switch off the power so that the printer does not start up while the power cord is plugged in.
  • Open up the ink cartridge and then, remove all of the ink cartridges and place them on a blotter surface because ink may leak out of the cartridge. Pour little bit of head cleaning fluid into the other container to ensure that the main bottle is not contaminated while cleaning process is going on.
  • Dip little bit of clean cotton swab into the fluid and then, apply bulge of ink cartridge slot at one end of the printer ink cartridge which is located at the top. A flashlight will appear which will help illuminate all of the ports. Take cotton swabs) and blot up fluids completely. Repeat the process twice or thrice with fresh cotton swabs.
Related Blog: How To Fix Epson Printer Error Code 0x91?
  • Move on to the next cartridge port and repeat the above step. When all ink ports are completely cleaned, just use a fresh cotton swab and dry the ink cartridge completely. Remove any left out cotton fibers which may be lingering.
  • Dampen a fresh cotton swab and then pick up the first ink cartridge to reinstall it. Place the cotton into the port with a turning motion until the swab end is 1/3 to 1/2 the distance of the cotton. Turn twice or thrice and remove the cotton swab to install the ink cartridge.
  • When all ink cartridges have been installed, do ensure that the power switch is in the off position. Plug in the power cord again.
  • Turn on the printer when the printer completes its initialization process. Run a head cleaning cycle from the printer utility now. Activate a nozzle pattern checkup mode.
  • If the nozzle pattern is not accurate then, turn off the printer and allow it to sit for 12 hours.
  • Repeat the head cleaning or nozzle check section.
  • If a head still continues to misprinting then, fill an empty cartridge with a cleaning fluid. Put it in the bad position and then, run a head cleaning cycle. Turn off the printer and wait for few days. Perform this test again.
  • Consider replacing it if the error in clog does not clear.

epson-printer-support-phone-number

Call us at Epson Printer Support Number to Resolve More Such issues

 We are engrossed with a team of potential and rich team of technical expert who are available at Epson Printer Customer Support 24*7 hours to assist its customers with the most appropriate solution. Our unique way of delivering solutions has made us stand distinguished from other competitors. So, call us anytime and get the best solution to your queries.

10Oct/17
Fix Epson Printer T3 Error Code 20000010

How To Fix Epson Printer T3 Error Code 20000010?

The Epson Printer T3 Error Code 20000010 is usually a general error which occurs every time when a user is trying to load any paper at time he/she is trying to print out documents. Further the error is a result of damaged paper which happens while making an attempt to load a paper and it unexpectedly falls off. Further, it is quite possible that papers are stucked off inside the printer device which may lead to triggering of the loading mechanism. So, this is the only reason why this issue occurs. Well, we have solutions to fix Epson Printer T3 error code 20000010 with appropriate answers.

 Epson Printer T3 Error Code 20000010

Solutions to troubleshoot Epson Printer T3 error code 20000010

Solution 1: Clean off all foil contacts in the printer

To rectify this issue faster, users are requested to first break the cartridge in and out for few times. If this does not seems to be work our then, it is advised to remove the printer cartridge directly from the printer and then completely clean off the foil contacts. One needs to be very cautious while doing this and make sure that they do not wipe out the nozzles from where the ink comes out. The next thing is to insert the cartridge and then, switch on the printer. Well, this will definitely solve your issue but if it does not then, try out our second solution.

Solution 2: Try out this second method to resolve this error

Make sure that your printer is directly connected to the computer via USB cable. Now, your reset utility will not work properly if you are working over network connection 2. Users who are trying to run the utility on Vista or on Windows 7, it will also not work. All the software should be run in a compatibility mode. The next thing is to download the “Adjustment utility” to adjust the appropriate system’s date as well as time as per as instructions given. Now, right click on the “Adjprog” icon and then, select the “Properties“option. Users are now advised to choose the “compatibility” option and click on the “WINDOWS XP“icon. Find and then select the “Run as Administrator” icon and tap on the “OK” button which is located right at the bottom of the “Additional notes” icon. This is followed in case if a user is working on Windows 7.

Epson Customer Support
Get connected to Epson Printer Support Number and obtain the best solution from us!

We are one of the most renowned tech support services available at Epson Printer Customer Support Number 24*7 hours to help you out in resolving the complex to complex issue with the most appropriate solution. Our team is backed by exceptionally qualified, experienced and competent technicians who holds deep knowledge in solving out Epson printer issues immediately. So call us now and get your system working back to normal mode.

07Oct/17
How To Fix printer Error Code 6203

How To Fix printer Error Code 6203

The error code “6203” usually happens while the scanner home is not at all detected during the installation process of the printer. There are various reasons behind the error code 6203 which gets displayed mostly while the printed calibrated sheet is directly put into the tray for the purpose of scanning issues as well as the push button is pressed. Well, we have solutions to fix Epson Printer error code 6203 with detailed explanation of each step.

  printer Error Code 6203

Solution to troubleshoot fix error code 6203

Error code “6203” cab be solved by following our instructions carefully. Users are advised to open the access door of the printer and then, disconnect the power adapter from that. The next step is to wait for at least 30 seconds for the printer to get the reset button working. Now, connect the power adapter back to the printer again. Now, turn on the printer again if it is needed. Once you get to know that the printer gets powered on, a message will be displayed as a “Printer access door open gets displayed”. This message will pop-up where the next step will be to close the access door of the printer device.

When you actually need a professional guidance?

Related Blog: How To Fix Epson Printer Error Code W-12?

There may be a situation where the printer device does not respond to the corrective measures applied by you and behaves in an odd way. In such cases, a direct involvement may worsen the situation rather than solving it. You will also notice that there is a hardware issue which may cause in capable of using with the printer’s hardware device. So, here one needs to approach for a professional help immediately.  Proceed to our below contact details to take a professional help if still in confusion.

If still you are stuck in this error code then, approach us at Epson Printer Support Number below!

epson-printer-support-phone-number

Get connected to our technicians at Epson Customer Support Number and allow us to provide the most appropriate solution for your issues. We are approachable for customers 24*7 hours to assist them with all kinds of solutions that are best suitable for their Epson printer issue. Our tech support service solutions are guaranteed to be delivered within defined timeline.

05Oct/17
How to Restore an accidentally deleted printer back to computer

How to Restore an accidentally deleted printer back to computer

Epson printer are well known devices used by thousands of users worldwide. But sometimes these printers can suffer from severe technical faults such as restoring accidentally deleted printers issue which occurs due to freezing problems, data corruption technical problems, system crash problems and other corrupted issues of the restored printer are responsible for such faults. Users here are always advised to perform repair actions such as file scan, threat scan as well as registry optimization process with the help of suitable program files. Below we will introduce you steps to fix Restore an accidentally deleted printer back to computer .

 Restore an accidentally deleted printer back to computer

Steps to troubleshoot restore accidentally deleted printer back to computer issue

Step 1: System Restore

Users are advised to work with the system restore software to recover their device as well as its working configuration issue. It will help users to restore the system configuration back to its normal state to enable you work properly. Also it will help undo all deleted action performed by the user.

Step 2: Restoring system

It can easily be done by accessing the folder of OS ‘Start’ menu. You will come across various options to allow themselect from a number of created restore points and choose one which was created at the time when printer was installed.Now reboot the system to restore its working configuration back to normal mode. The deleted printer can easily be accessed from the ‘Control Panel’ where the system will restart after the restore operation has been performed.

Step 3: Reinstallation of the device

Work with the ‘Add Printer’ options in the ‘Control Panel’ to select the software from the available listed icons in the ‘Add printer’ menu. The next thing is to install the printer in the system. Restart the system if necessary to recover and work with the deleted printer with no further issues.

Related Blog: How To Fix Epson Printer Error Code W-12?

epson-printer-support-phone-number

Call our technicians at Epson Printer Support Number and fix your problems immediately Get connected to our technicians at Epson Printer Customer Support Number 1-800-610-6962 to resolve your complex to complex issues with our solutions. We are available 24*7 hours to assist you in fixing up Epson printer issues as and when needed. Call us now and experience our world class support solutions.

 

28Sep/17
Epson Printer Network Problems

How to Connect Epson Printer L355 to WIFI Network?

Connect Epson printer L355 wirelessly when you bring your new printer home, you will need to install the software which came with the new printer to start it. Setting the printer to wirelessly, will help you to print the document or file from all over the home or office area. There are three ways to set up printer including the Epson method, through cables, and WPS. To resolve is you need to use WPS, which is more difficult; you need to check your router and observe if it has a sticker on it which says Wi-Fi Protected Setup. If that sticker is ON the router you will have to use the WPS to set up your printer. In case, you are previously using WPS and then you don’t need to use it for this installation, might be it will turn into a cause of your whole wireless network to fail. Whereas through the Epson method, you don’t require cables and it offers setup without the possibility of network failure. Well, don’t worry about it anything, because you can do it very easily. Here the blog will explain you How to Connect Epson Printer L355 to WIFI Network. You just need to follow the below steps to solve the problem.

Epson Printer L355 to WIFI Network

Steps to Connect Epson Printer L355 to WIFI Network

Follow the steps below to enable Epson Connect to your Epson printer in Windows computer.

  • Make sure your Epson printer is set up with a wireless or Ethernet connection. If not, then you can do it, by going to the Epson Support main page, then select your product, then select “Manuals”, and then hit on “Start Here”.
  • Then download and install the “Epson Connect Printer Setup Utility” through visiting the official site.
  • Read the “End-User License Agreement”, and then click “Next” button.
  • Next, hit on “Install” and then “Finish”.
  • Now you will need to select your product and then click “Next” button.
  • Then choose “Printer Registration” radio button, and then click “Next”.
  • Next, choose “Agree” button, and then click “Next” button.
  • After then you will see the “Register a printer to Epson Connect” message, so, click on “OK” option.
  • Now you will need to do one of the following:
  • If you are creating a new account, then you will need to fill out the form for “Create an Epson Connect Account”, and tap on “Finish” button.
  • If you are registering a new product with an existing account, then you will need to select “I already have an account”, and then fill out the form for “Add a new printer” form, and then tap on “Add” button.
  • Next, click “Close” button.

Now, you are successfully connected your Epson Printer L355 to WIFI Network, so check it by printing the document.

Related Blog: How to Fix Epson Printer 7110 Error Light Blinking?

In case, you have any doubt or problem to follow the above steps, then you should contact with experts to get instant help.

Call at Epson Printer Customer Support Phone Number to Reach With Professionals

epson-printer-support-phone-number

You can connect with our highly skilled Epson Printer customer support team anytime from anywhere by dialing Epson Printer Customer Support Number, which is a toll-free and available 24×7 day to help. Through number, you will get the online guidance & help to resolve the problem as your doubt. A team of certified and experienced technicians are adequate in fixing all kinds of Epson Printer related technical problems, so you don’t need to worry about your troubles. Hence, simply dial this toll-free number, and connect with experts, who are available round the clock, and grab the comprehensive guide to troubleshoot Epson Printer issues quickly and easily.